The Resource The development of colour 3D food printing system : a thesis presented in partial fulfilment of the requirements for the degree of Master of Engineering in Mechatronics at Massey University, Palmerston North, New Zealand, Caleb Ian Millen

The development of colour 3D food printing system : a thesis presented in partial fulfilment of the requirements for the degree of Master of Engineering in Mechatronics at Massey University, Palmerston North, New Zealand, Caleb Ian Millen

Label
The development of colour 3D food printing system : a thesis presented in partial fulfilment of the requirements for the degree of Master of Engineering in Mechatronics at Massey University, Palmerston North, New Zealand
Title
The development of colour 3D food printing system
Title remainder
a thesis presented in partial fulfilment of the requirements for the degree of Master of Engineering in Mechatronics at Massey University, Palmerston North, New Zealand
Statement of responsibility
Caleb Ian Millen
Creator
Subject
Language
eng
Cataloging source
PU
http://library.link/vocab/creatorName
Millen, Caleb
Dewey number
664.024
Dissertation note
Thesis (M.E.)--Massey University, Palmerston North, 2012
Illustrations
illustrations
Index
no index present
Literary form
non fiction
Nature of contents
  • abstracts summaries
  • bibliography
  • theses
http://library.link/vocab/subjectName
  • Coloring matter in food
  • Three-dimensional printing
  • Food industry and trade
Label
The development of colour 3D food printing system : a thesis presented in partial fulfilment of the requirements for the degree of Master of Engineering in Mechatronics at Massey University, Palmerston North, New Zealand, Caleb Ian Millen
Instantiates
Publication
Note
NO BORROWABLE COPY
Bibliography note
Includes bibliographical references (leaves 115-125)
Contents
1. Introduction -- 2. Review of food printing and rapid prototyping -- 3. Review of mixing and pumping techniques -- 4. Dispensing considerations -- 5. Design of mixing techniques for food printing -- 6. Image processing, machine control and data logging -- 7. Hardware design -- 8. Testing and results -- 9. Conclusions, recommendations and discussion
Control code
14785345
Dimensions
30 cm
Extent
xi, 126 leaves
Other physical details
ill. (some col.)
Label
The development of colour 3D food printing system : a thesis presented in partial fulfilment of the requirements for the degree of Master of Engineering in Mechatronics at Massey University, Palmerston North, New Zealand, Caleb Ian Millen
Publication
Note
NO BORROWABLE COPY
Bibliography note
Includes bibliographical references (leaves 115-125)
Contents
1. Introduction -- 2. Review of food printing and rapid prototyping -- 3. Review of mixing and pumping techniques -- 4. Dispensing considerations -- 5. Design of mixing techniques for food printing -- 6. Image processing, machine control and data logging -- 7. Hardware design -- 8. Testing and results -- 9. Conclusions, recommendations and discussion
Control code
14785345
Dimensions
30 cm
Extent
xi, 126 leaves
Other physical details
ill. (some col.)

Library Locations

    • InternetBorrow it
      Albany, Auckland, 0632, NZ
    • ManawatÅ« LibraryBorrow it
      Tennent Drive, Palmerston North, Palmerston North, 4472, NZ
      -40.385340 175.617349
Processing Feedback ...