Coverart for item
The Resource Materials for modern technologies III : MST-S 2017 : selected, peer reviewed papers from the 2017 Spring International Conference on Material Sciences and Technology (MST-S), April 18-20, 2017, Chengdu, China, edited by Prof. Yue Li, Rolin Zhang and Dr. Zhenli Gong

Materials for modern technologies III : MST-S 2017 : selected, peer reviewed papers from the 2017 Spring International Conference on Material Sciences and Technology (MST-S), April 18-20, 2017, Chengdu, China, edited by Prof. Yue Li, Rolin Zhang and Dr. Zhenli Gong

Label
Materials for modern technologies III : MST-S 2017 : selected, peer reviewed papers from the 2017 Spring International Conference on Material Sciences and Technology (MST-S), April 18-20, 2017, Chengdu, China
Title
Materials for modern technologies III : MST-S 2017
Title remainder
selected, peer reviewed papers from the 2017 Spring International Conference on Material Sciences and Technology (MST-S), April 18-20, 2017, Chengdu, China
Statement of responsibility
edited by Prof. Yue Li, Rolin Zhang and Dr. Zhenli Gong
Creator
Contributor
Creator
Subject
Genre
Language
eng
Member of
Dewey number
620.1/1
Index
index present
Literary form
non fiction
http://bibfra.me/vocab/lite/meetingDate
2017
http://bibfra.me/vocab/lite/meetingName
Spring International Conference on Material Sciences and Technology
Nature of contents
  • dictionaries
  • bibliography
http://library.link/vocab/relatedWorkOrContributorName
  • Li, Yue,
  • Zhang, Rolin,
  • Gong, Zhenli,
Series statement
Materials science forum
Series volume
volume 896
http://library.link/vocab/subjectName
  • Materials
  • Materials science
  • Semiconductors
Label
Materials for modern technologies III : MST-S 2017 : selected, peer reviewed papers from the 2017 Spring International Conference on Material Sciences and Technology (MST-S), April 18-20, 2017, Chengdu, China, edited by Prof. Yue Li, Rolin Zhang and Dr. Zhenli Gong
Instantiates
Publication
Copyright
Antecedent source
unknown
Bibliography note
Includes bibliographical references and index
Color
multicolored
Contents
  • Materials for Modern Technologies III; Preface, Committee; Table of Contents; Chapter 1: Nanomaterials and Semiconductors; Electronic Structures of Vacancy Defective Chiral (6,2) SiC Nanotubes; Research on Solid Nanocluster NaXe for Making Micro-Excimer Laser; Preparation and Photocatalytic Property of SO42-/TiO2, SO42-/Fe2O3 Nano-Particles; Au Nanoparticles Doped TiO2 Mesoporous Perovskite Solar Cells; Efficient SERS Substrate Fabricated by Simple Aluminum Pits Template; Graphene Oxide PMMA Solid on the Absorption of Lead Ion; Two Step Deposition of Ag Doped ZnO Film
  • Chapter 2: Polymers, Composites and CeramicsWhy Synthesizing Poly(1,4-Phenylene Sulfide) through Oxidative Polymerization Has not so far Been Adopted as the Industrial Process; Preparation and Properties of Cross-Linked Polysiloxane Microspheres for Light-Scattering; Influence of PCBM on the Glass Transition Temperature (Tg) of Poly(N-Vinylcarbazole)-Based Photorefractive Composite; The Effect of the Fe2+B/Fe3+B Ratio on Electric Conductivity and Corrosion Resistance of Anodes; The Influence of Hydrostatic Pressure and Electric Field to the Remanent Polarization of PbLa(Zr,Sn,Ti)O3 Ceramic
  • Effects of MoS2 on Tribological Properties and Mechanically Mixed Layer of Al Matrix CompositesStudy of Alternating Current Impedance of Basic Magnesium Sulfate Cement; Study of Plasma Spraying Radar Absorbing Coating; Surface Micromorphology and Growth Rate Related to Supersaturation of KDP Crystals Grown at Different Temperature; First-Principle Calculation of Al2O3(012)/SiC(310) Interface Model; An Experimental Study for Low-Cycle Fatigue Crack Propagation of Glidcop Al-15; Preparation and Light Trapping Properties of Double-Layered ZnO:Al Films with Textured Surface
  • Chapter 3: Technologies in Chemical EngineeringEffect of Si/Al Ratios on the Structure and Catalytic Properties of Alkaline-Treated ZSM-5 Catalysts; Dynamics of Bed for Regeneration of Cerium Oxide High-Temperature Coal Gas Desulfurization Sorbent; The Effect of Regeneration Conditions on the Properties of CeO2 Desulfurization Sorbent in SO2 Atmosphere; The Properties of Iron Oxide Desulfurization Sorbents Regenerated under the Synergy of SO2-O2 Atmosphere; Synthesis and Application of Itaconic Acid Water-Coke Slurry Dispersant
  • Kinetics of Cavitation Bubble in Ultrasonic Degassing of Casting Aluminium AlloyMicrostructure and Mechanical Properties of Twinning M/A Islands in a X100 High Strength Pipeline Steel; Chapter 4: Metallurgical Technologies and Materials Processing; Microstructural Evolution after Cold Forming and Recrystallization Annealing in Commercially Pure Titanium Sheet; The Influence of the Substitution of Si by Al on the Properties of Hot Rolled C-Mn-Si TRIP Steel; Characterization of the Welded-Joint of High-Strength High-Toughness Seamless Steel Pipe under High-Cycle Fatigue Condition
Control code
ocn982487169
Dimensions
unknown
Extent
1 online resource
File format
unknown
Form of item
online
Isbn
9783035730937
Level of compression
unknown
Note
eBooks on EBSCOhost
Quality assurance targets
not applicable
Reformatting quality
unknown
Sound
unknown sound
Specific material designation
remote
System control number
(OCoLC)982487169
Label
Materials for modern technologies III : MST-S 2017 : selected, peer reviewed papers from the 2017 Spring International Conference on Material Sciences and Technology (MST-S), April 18-20, 2017, Chengdu, China, edited by Prof. Yue Li, Rolin Zhang and Dr. Zhenli Gong
Publication
Copyright
Antecedent source
unknown
Bibliography note
Includes bibliographical references and index
Color
multicolored
Contents
  • Materials for Modern Technologies III; Preface, Committee; Table of Contents; Chapter 1: Nanomaterials and Semiconductors; Electronic Structures of Vacancy Defective Chiral (6,2) SiC Nanotubes; Research on Solid Nanocluster NaXe for Making Micro-Excimer Laser; Preparation and Photocatalytic Property of SO42-/TiO2, SO42-/Fe2O3 Nano-Particles; Au Nanoparticles Doped TiO2 Mesoporous Perovskite Solar Cells; Efficient SERS Substrate Fabricated by Simple Aluminum Pits Template; Graphene Oxide PMMA Solid on the Absorption of Lead Ion; Two Step Deposition of Ag Doped ZnO Film
  • Chapter 2: Polymers, Composites and CeramicsWhy Synthesizing Poly(1,4-Phenylene Sulfide) through Oxidative Polymerization Has not so far Been Adopted as the Industrial Process; Preparation and Properties of Cross-Linked Polysiloxane Microspheres for Light-Scattering; Influence of PCBM on the Glass Transition Temperature (Tg) of Poly(N-Vinylcarbazole)-Based Photorefractive Composite; The Effect of the Fe2+B/Fe3+B Ratio on Electric Conductivity and Corrosion Resistance of Anodes; The Influence of Hydrostatic Pressure and Electric Field to the Remanent Polarization of PbLa(Zr,Sn,Ti)O3 Ceramic
  • Effects of MoS2 on Tribological Properties and Mechanically Mixed Layer of Al Matrix CompositesStudy of Alternating Current Impedance of Basic Magnesium Sulfate Cement; Study of Plasma Spraying Radar Absorbing Coating; Surface Micromorphology and Growth Rate Related to Supersaturation of KDP Crystals Grown at Different Temperature; First-Principle Calculation of Al2O3(012)/SiC(310) Interface Model; An Experimental Study for Low-Cycle Fatigue Crack Propagation of Glidcop Al-15; Preparation and Light Trapping Properties of Double-Layered ZnO:Al Films with Textured Surface
  • Chapter 3: Technologies in Chemical EngineeringEffect of Si/Al Ratios on the Structure and Catalytic Properties of Alkaline-Treated ZSM-5 Catalysts; Dynamics of Bed for Regeneration of Cerium Oxide High-Temperature Coal Gas Desulfurization Sorbent; The Effect of Regeneration Conditions on the Properties of CeO2 Desulfurization Sorbent in SO2 Atmosphere; The Properties of Iron Oxide Desulfurization Sorbents Regenerated under the Synergy of SO2-O2 Atmosphere; Synthesis and Application of Itaconic Acid Water-Coke Slurry Dispersant
  • Kinetics of Cavitation Bubble in Ultrasonic Degassing of Casting Aluminium AlloyMicrostructure and Mechanical Properties of Twinning M/A Islands in a X100 High Strength Pipeline Steel; Chapter 4: Metallurgical Technologies and Materials Processing; Microstructural Evolution after Cold Forming and Recrystallization Annealing in Commercially Pure Titanium Sheet; The Influence of the Substitution of Si by Al on the Properties of Hot Rolled C-Mn-Si TRIP Steel; Characterization of the Welded-Joint of High-Strength High-Toughness Seamless Steel Pipe under High-Cycle Fatigue Condition
Control code
ocn982487169
Dimensions
unknown
Extent
1 online resource
File format
unknown
Form of item
online
Isbn
9783035730937
Level of compression
unknown
Note
eBooks on EBSCOhost
Quality assurance targets
not applicable
Reformatting quality
unknown
Sound
unknown sound
Specific material designation
remote
System control number
(OCoLC)982487169

Library Locations

    • InternetBorrow it
      Albany, Auckland, 0632, NZ
Processing Feedback ...