The Resource Fatigue and Fracture Mechanics XXV : Selected, Peer Reviewed Papers from the 25th Polish National Conference on ""Fatigue and Fracture Mechanics"", May 20-23, 2014, Fojutowo, Poland, edited by Dariusz Skibicki, (electronic resource)
Fatigue and Fracture Mechanics XXV : Selected, Peer Reviewed Papers from the 25th Polish National Conference on ""Fatigue and Fracture Mechanics"", May 20-23, 2014, Fojutowo, Poland, edited by Dariusz Skibicki, (electronic resource)
Resource Information
The item Fatigue and Fracture Mechanics XXV : Selected, Peer Reviewed Papers from the 25th Polish National Conference on ""Fatigue and Fracture Mechanics"", May 20-23, 2014, Fojutowo, Poland, edited by Dariusz Skibicki, (electronic resource) represents a specific, individual, material embodiment of a distinct intellectual or artistic creation found in Massey University Library, University of New Zealand.This item is available to borrow from 1 library branch.
Resource Information
The item Fatigue and Fracture Mechanics XXV : Selected, Peer Reviewed Papers from the 25th Polish National Conference on ""Fatigue and Fracture Mechanics"", May 20-23, 2014, Fojutowo, Poland, edited by Dariusz Skibicki, (electronic resource) represents a specific, individual, material embodiment of a distinct intellectual or artistic creation found in Massey University Library, University of New Zealand.
This item is available to borrow from 1 library branch.
- Summary
- Collection of selected, peer reviewed papers from the 25 th Polish National Conference on "Fatigue and Fracture Mechanics"", May 20-23, 2014, Fojutowo, Poland. The 45 papers are grouped as follows: Chapter 1: Fatigue of Materials, Chapter 2: Fracture Behaviour of Materials, Chapter 3: Other Aspects of Material Strength
- Language
- eng
- Extent
- 1 online resource (296 pages)
- Note
- The Influence of the Out-of-Plane Constraint on Fracture Toughness of High Strength Steel at Low Temperatures
- Contents
-
- Fatigue and Fracture Mechanics XXV; Preface and Scientific Committee; Table of Contents; Chapter 1: Fatigue of Materials; The Influence of the Ferrite and Pearlite Grain Size on the S-N Fatigue Characteristics of Steel; Experimental Investigation of Fatigue Damage Accumulation in En295 Steel; Multiaxial Fatigue Life Assessment Method Based on the Mean Value of Modified Second Invariant of the Deviatoric Stress; Fatigue Characteristic of S355J2 Steel after Surface Frictional-Mechanical Treatment in Corrosive Environment
- Analysis of Strain Distribution in Notch Zone in Aluminium FSW Joints for Irregular Fatigue Loading Conditions; Comparison of C45 Steel Fatigue Characteristics Carried out at Controlled Stress and Energy Parameter, Subjected to Fully Reversed Bending; Accumulation of Fatigue Damages for Block-Type Loads with Use of Material Memory Function; Influence of Stresses below the Fatigue Limit on Fatigue Life; Cumulative Energy of Fatigue Cracking under Variable Amplitude Loading on the Example of C45 Steel; Fatigue Life of CrMoV Steel after Long Term Service
- Accuracy of Analytical-Experimental Method for Determining the Fatigue Characteristics in a Limited Life Region; Formulation of a Direct Spectral Method for Counting of Cycles for Bi-Modal Stress History; Analysis of Size Effect in High-Cycle Fatigue for EN AW-6063; Applicability of Empirical Formulae for the Fatigue Notch Factor to Estimate Riveted Lap Joint Fatigue Strength; Thermo-Mechanical Fatigue of Thick-Walled Components of Power Devices
- Research on the Dependence between the Fatigue Life of X20CrMoV12.1 and P91 Steels under the Conditions of the Interactions of Thermo-Mechanical and Isothermal Low-Cycle Fatigue; Structure and Mechanical Properties of 1.4539 Austenic Steel Joints Made by TIG and Laser-Beam Welding; Cast Steel Tests under Thermal Fatigue Conditions; Determination of Fatigue Life with the Use of Spectral Method on the Basis of Fatigue Strain Characteristics; Influence of Estimation Methods of Power Spectral Density Function on the Calculated Fatigue Life with Spectral Method
- Analysis of the Fatigue Life of Sintered Porous 316L Steel with Different Density; Chapter 2: Fracture Behaviour of Materials; Crack Growth Path in Specimens with Rectangular Section under Bending with Torsion; The Influence of In-Plane Constraint on Void Behavior in Front of a Crack in Plane Strain; Method for Monitoring the Destruction Process of Materials Using a High-Speed Camera and a Catodioptric Stereo-Vision System; The Influence of Strain Conditions in Steel Samples on the Fatigue Crack Growth and Delay after Overload
- Isbn
- 9783038267089
- Label
- Fatigue and Fracture Mechanics XXV : Selected, Peer Reviewed Papers from the 25th Polish National Conference on ""Fatigue and Fracture Mechanics"", May 20-23, 2014, Fojutowo, Poland
- Title
- Fatigue and Fracture Mechanics XXV
- Title remainder
- Selected, Peer Reviewed Papers from the 25th Polish National Conference on ""Fatigue and Fracture Mechanics"", May 20-23, 2014, Fojutowo, Poland
- Statement of responsibility
- edited by Dariusz Skibicki
- Language
- eng
- Summary
- Collection of selected, peer reviewed papers from the 25 th Polish National Conference on "Fatigue and Fracture Mechanics"", May 20-23, 2014, Fojutowo, Poland. The 45 papers are grouped as follows: Chapter 1: Fatigue of Materials, Chapter 2: Fracture Behaviour of Materials, Chapter 3: Other Aspects of Material Strength
- Dewey number
-
- 620.11
- 620.1126
- Illustrations
- illustrations
- Index
- no index present
- Literary form
- non fiction
- http://bibfra.me/vocab/lite/meetingDate
- 2014
- http://bibfra.me/vocab/lite/meetingName
- Polish National Conference on "Fatigue and Fracture Mechanics"
- Nature of contents
-
- dictionaries
- bibliography
- http://library.link/vocab/relatedWorkOrContributorName
- Skibicki, Dariusz,
- Series statement
- Solid State Phenomena
- Series volume
- v. 224
- http://library.link/vocab/subjectName
-
- Fracture mechanics
- Materials
- Materials
- Label
- Fatigue and Fracture Mechanics XXV : Selected, Peer Reviewed Papers from the 25th Polish National Conference on ""Fatigue and Fracture Mechanics"", May 20-23, 2014, Fojutowo, Poland, edited by Dariusz Skibicki, (electronic resource)
- Note
- The Influence of the Out-of-Plane Constraint on Fracture Toughness of High Strength Steel at Low Temperatures
- Bibliography note
- Includes bibliographical references
- Contents
-
- Fatigue and Fracture Mechanics XXV; Preface and Scientific Committee; Table of Contents; Chapter 1: Fatigue of Materials; The Influence of the Ferrite and Pearlite Grain Size on the S-N Fatigue Characteristics of Steel; Experimental Investigation of Fatigue Damage Accumulation in En295 Steel; Multiaxial Fatigue Life Assessment Method Based on the Mean Value of Modified Second Invariant of the Deviatoric Stress; Fatigue Characteristic of S355J2 Steel after Surface Frictional-Mechanical Treatment in Corrosive Environment
- Analysis of Strain Distribution in Notch Zone in Aluminium FSW Joints for Irregular Fatigue Loading Conditions; Comparison of C45 Steel Fatigue Characteristics Carried out at Controlled Stress and Energy Parameter, Subjected to Fully Reversed Bending; Accumulation of Fatigue Damages for Block-Type Loads with Use of Material Memory Function; Influence of Stresses below the Fatigue Limit on Fatigue Life; Cumulative Energy of Fatigue Cracking under Variable Amplitude Loading on the Example of C45 Steel; Fatigue Life of CrMoV Steel after Long Term Service
- Accuracy of Analytical-Experimental Method for Determining the Fatigue Characteristics in a Limited Life Region; Formulation of a Direct Spectral Method for Counting of Cycles for Bi-Modal Stress History; Analysis of Size Effect in High-Cycle Fatigue for EN AW-6063; Applicability of Empirical Formulae for the Fatigue Notch Factor to Estimate Riveted Lap Joint Fatigue Strength; Thermo-Mechanical Fatigue of Thick-Walled Components of Power Devices
- Research on the Dependence between the Fatigue Life of X20CrMoV12.1 and P91 Steels under the Conditions of the Interactions of Thermo-Mechanical and Isothermal Low-Cycle Fatigue; Structure and Mechanical Properties of 1.4539 Austenic Steel Joints Made by TIG and Laser-Beam Welding; Cast Steel Tests under Thermal Fatigue Conditions; Determination of Fatigue Life with the Use of Spectral Method on the Basis of Fatigue Strain Characteristics; Influence of Estimation Methods of Power Spectral Density Function on the Calculated Fatigue Life with Spectral Method
- Analysis of the Fatigue Life of Sintered Porous 316L Steel with Different Density; Chapter 2: Fracture Behaviour of Materials; Crack Growth Path in Specimens with Rectangular Section under Bending with Torsion; The Influence of In-Plane Constraint on Void Behavior in Front of a Crack in Plane Strain; Method for Monitoring the Destruction Process of Materials Using a High-Speed Camera and a Catodioptric Stereo-Vision System; The Influence of Strain Conditions in Steel Samples on the Fatigue Crack Growth and Delay after Overload
- Control code
- ocn899148451
- Extent
- 1 online resource (296 pages)
- Form of item
- online
- Isbn
- 9783038267089
- Note
- eBooks on EBSCOhost
- Other physical details
- illustrations (some color)
- Specific material designation
- remote
- System control number
- (OCoLC)899148451
- Label
- Fatigue and Fracture Mechanics XXV : Selected, Peer Reviewed Papers from the 25th Polish National Conference on ""Fatigue and Fracture Mechanics"", May 20-23, 2014, Fojutowo, Poland, edited by Dariusz Skibicki, (electronic resource)
- Note
- The Influence of the Out-of-Plane Constraint on Fracture Toughness of High Strength Steel at Low Temperatures
- Bibliography note
- Includes bibliographical references
- Contents
-
- Fatigue and Fracture Mechanics XXV; Preface and Scientific Committee; Table of Contents; Chapter 1: Fatigue of Materials; The Influence of the Ferrite and Pearlite Grain Size on the S-N Fatigue Characteristics of Steel; Experimental Investigation of Fatigue Damage Accumulation in En295 Steel; Multiaxial Fatigue Life Assessment Method Based on the Mean Value of Modified Second Invariant of the Deviatoric Stress; Fatigue Characteristic of S355J2 Steel after Surface Frictional-Mechanical Treatment in Corrosive Environment
- Analysis of Strain Distribution in Notch Zone in Aluminium FSW Joints for Irregular Fatigue Loading Conditions; Comparison of C45 Steel Fatigue Characteristics Carried out at Controlled Stress and Energy Parameter, Subjected to Fully Reversed Bending; Accumulation of Fatigue Damages for Block-Type Loads with Use of Material Memory Function; Influence of Stresses below the Fatigue Limit on Fatigue Life; Cumulative Energy of Fatigue Cracking under Variable Amplitude Loading on the Example of C45 Steel; Fatigue Life of CrMoV Steel after Long Term Service
- Accuracy of Analytical-Experimental Method for Determining the Fatigue Characteristics in a Limited Life Region; Formulation of a Direct Spectral Method for Counting of Cycles for Bi-Modal Stress History; Analysis of Size Effect in High-Cycle Fatigue for EN AW-6063; Applicability of Empirical Formulae for the Fatigue Notch Factor to Estimate Riveted Lap Joint Fatigue Strength; Thermo-Mechanical Fatigue of Thick-Walled Components of Power Devices
- Research on the Dependence between the Fatigue Life of X20CrMoV12.1 and P91 Steels under the Conditions of the Interactions of Thermo-Mechanical and Isothermal Low-Cycle Fatigue; Structure and Mechanical Properties of 1.4539 Austenic Steel Joints Made by TIG and Laser-Beam Welding; Cast Steel Tests under Thermal Fatigue Conditions; Determination of Fatigue Life with the Use of Spectral Method on the Basis of Fatigue Strain Characteristics; Influence of Estimation Methods of Power Spectral Density Function on the Calculated Fatigue Life with Spectral Method
- Analysis of the Fatigue Life of Sintered Porous 316L Steel with Different Density; Chapter 2: Fracture Behaviour of Materials; Crack Growth Path in Specimens with Rectangular Section under Bending with Torsion; The Influence of In-Plane Constraint on Void Behavior in Front of a Crack in Plane Strain; Method for Monitoring the Destruction Process of Materials Using a High-Speed Camera and a Catodioptric Stereo-Vision System; The Influence of Strain Conditions in Steel Samples on the Fatigue Crack Growth and Delay after Overload
- Control code
- ocn899148451
- Extent
- 1 online resource (296 pages)
- Form of item
- online
- Isbn
- 9783038267089
- Note
- eBooks on EBSCOhost
- Other physical details
- illustrations (some color)
- Specific material designation
- remote
- System control number
- (OCoLC)899148451
Library Links
Embed (Experimental)
Settings
Select options that apply then copy and paste the RDF/HTML data fragment to include in your application
Embed this data in a secure (HTTPS) page:
Layout options:
Include data citation:
<div class="citation" vocab="http://schema.org/"><i class="fa fa-external-link-square fa-fw"></i> Data from <span resource="http://link.massey.ac.nz/portal/Fatigue-and-Fracture-Mechanics-XXV--Selected/3cUNvdzs8rk/" typeof="Book http://bibfra.me/vocab/lite/Item"><span property="name http://bibfra.me/vocab/lite/label"><a href="http://link.massey.ac.nz/portal/Fatigue-and-Fracture-Mechanics-XXV--Selected/3cUNvdzs8rk/">Fatigue and Fracture Mechanics XXV : Selected, Peer Reviewed Papers from the 25th Polish National Conference on ""Fatigue and Fracture Mechanics"", May 20-23, 2014, Fojutowo, Poland, edited by Dariusz Skibicki, (electronic resource)</a></span> - <span property="potentialAction" typeOf="OrganizeAction"><span property="agent" typeof="LibrarySystem http://library.link/vocab/LibrarySystem" resource="http://link.massey.ac.nz/"><span property="name http://bibfra.me/vocab/lite/label"><a property="url" href="http://link.massey.ac.nz/">Massey University Library, University of New Zealand</a></span></span></span></span></div>
Note: Adjust the width and height settings defined in the RDF/HTML code fragment to best match your requirements
Preview
Cite Data - Experimental
Data Citation of the Item Fatigue and Fracture Mechanics XXV : Selected, Peer Reviewed Papers from the 25th Polish National Conference on ""Fatigue and Fracture Mechanics"", May 20-23, 2014, Fojutowo, Poland, edited by Dariusz Skibicki, (electronic resource)
Copy and paste the following RDF/HTML data fragment to cite this resource
<div class="citation" vocab="http://schema.org/"><i class="fa fa-external-link-square fa-fw"></i> Data from <span resource="http://link.massey.ac.nz/portal/Fatigue-and-Fracture-Mechanics-XXV--Selected/3cUNvdzs8rk/" typeof="Book http://bibfra.me/vocab/lite/Item"><span property="name http://bibfra.me/vocab/lite/label"><a href="http://link.massey.ac.nz/portal/Fatigue-and-Fracture-Mechanics-XXV--Selected/3cUNvdzs8rk/">Fatigue and Fracture Mechanics XXV : Selected, Peer Reviewed Papers from the 25th Polish National Conference on ""Fatigue and Fracture Mechanics"", May 20-23, 2014, Fojutowo, Poland, edited by Dariusz Skibicki, (electronic resource)</a></span> - <span property="potentialAction" typeOf="OrganizeAction"><span property="agent" typeof="LibrarySystem http://library.link/vocab/LibrarySystem" resource="http://link.massey.ac.nz/"><span property="name http://bibfra.me/vocab/lite/label"><a property="url" href="http://link.massey.ac.nz/">Massey University Library, University of New Zealand</a></span></span></span></span></div>