Coverart for item
The Resource Characterization of metals and alloys, Ramiro Pérez Campos, Antonio Contreras Cuevas, Rodrigo A. Esparza Muñoz, editors

Characterization of metals and alloys, Ramiro Pérez Campos, Antonio Contreras Cuevas, Rodrigo A. Esparza Muñoz, editors

Label
Characterization of metals and alloys
Title
Characterization of metals and alloys
Statement of responsibility
Ramiro Pérez Campos, Antonio Contreras Cuevas, Rodrigo A. Esparza Muñoz, editors
Contributor
Subject
Language
eng
Dewey number
620.1/6
Index
no index present
Literary form
non fiction
Nature of contents
  • dictionaries
  • bibliography
http://library.link/vocab/relatedWorkOrContributorName
  • Pérez Campos, Ramiro,
  • Contreras Cuevas, Antonio,
  • Esparza Muñoz, Rodrigo A.,
http://library.link/vocab/subjectName
  • Metals
  • Alloys
Label
Characterization of metals and alloys, Ramiro Pérez Campos, Antonio Contreras Cuevas, Rodrigo A. Esparza Muñoz, editors
Instantiates
Publication
Copyright
Antecedent source
unknown
Color
multicolored
Contents
  • Preface; Acknowledgments; List of Abbreviations; Biography of Editors; Contents; Part I Characterization of Steels Used in the Oil Industry; 1 Mechanical and Metallurgical Properties of Grade X70 Steel Linepipe Produced by Non-conventional Heat Treatment; 1.1 Introduction; 1.2 Experimental; 1.3 Results and Discussion; 1.4 Conclusions; References; 2 Corrosion Inhibition of X52 Pipeline Steel in Chloride Solutions Using Nonionic Surfactant; 2.1 Introduction; 2.2 Experimental; 2.2.1 Steel Used (Electrode); 2.2.2 Test Solutions; 2.2.3 Electrochemical Evaluations; 2.3 Results and Discussion
  • 2.3.1 Electrode; 2.3.2 Electrochemical Impedance Spectroscopy (EIS); 2.3.3 Volume Fraction of Microstructural Regions; 2.3.4 Adsorption Process; 2.3.5 Surface Analysis After Electrochemical Test; 2.4 Conclusions; References; 3 Effect on the Microstructure and Mechanical Properties of the Structural Steel Welded in Marine Environment; 3.1 Introduction; 3.2 Experimental; 3.3 Results and Discussion; 3.4 Conclusions; References; Part II Characterization of Copper Alloys; 4 Mapping of Polycrystalline Flow During Hot Deformation by In Situ Tension Test of Sheet Copper Alloy; 4.1 Introduction
  • 4.2 Experimental; 4.2.1 Materials; 4.2.2 Microstructural Characterization; 4.2.3 In Situ Tension Test SEM Studies; 4.3 Results and Discussion; 4.3.1 Materials; 4.3.2 Microstructural Characterization; 4.3.3 In Situ Tension Test SEM Studies; 4.4 Conclusions; References; 5 Determination of the Activation Energy of Copper During In Situ Tension Testing by SEM; 5.1 Introduction; 5.2 Experimental; 5.2.1 Tensile Test in a Universal Machine; 5.2.2 Tensile Kammrath & Weiss Tensile Module at SEM; 5.3 Results and Discussion; 5.3.1 Tensile Test in a Universal Machine
  • 5.3.2 Tensile Kammrath & Weiss Tensile Module at SEM; 5.4 Conclusions; References; 6 Effect of Copper Additions on Secondary Carbide Precipitation in High Chromium with Cast Iron; 6.1 Introduction; 6.2 Experimental; 6.3 Results and Discussion; 6.3.1 As-Cast Structure; 6.3.2 Structure After Destabilization Heat Treatment; 6.3.3 Number and Average Diameter of Secondary Carbides; 6.3.4 Secondary Carbide Volume Fraction (SCVFrac.); 6.3.5 Retained Austenite Volume Fraction; 6.3.6 Microhardness of Matrix After Destabilization; 6.4 Conclusions; References
  • Part III Characterization of Steels Applying Heat Treatment; 7 Thermal Behavior of an HSLA Steel and the Impact in Phase Transformation: Submerged Arc Welding (SAW) Process Approach to Pipelines; 7.1 Introduction; 7.2 Experimental; 7.3 Results and Discussion; 7.3.1 Characterization of API 5L X70 Steel; 7.3.2 Dilatometry Curves; 7.3.3 Microhardness; 7.3.4 Optical Microscopy; 7.3.5 CCT Experimental Curve; 7.4 Conclusions; References; 8 Effect of Hydrogen on a Microalloyed Steel Permeate; 8.1 Introduction; 8.2 Developed Experimental; 8.2.1 Materials; 8.2.2 Heat Treatment; 8.2.3 Metallography
Control code
ocn961272184
Dimensions
unknown
Extent
1 online resource
File format
unknown
Form of item
online
Isbn
9783319316949
Level of compression
unknown
Note
SpringerLink
Quality assurance targets
not applicable
Reformatting quality
unknown
Sound
unknown sound
Specific material designation
remote
System control number
(OCoLC)961272184
Label
Characterization of metals and alloys, Ramiro Pérez Campos, Antonio Contreras Cuevas, Rodrigo A. Esparza Muñoz, editors
Publication
Copyright
Antecedent source
unknown
Color
multicolored
Contents
  • Preface; Acknowledgments; List of Abbreviations; Biography of Editors; Contents; Part I Characterization of Steels Used in the Oil Industry; 1 Mechanical and Metallurgical Properties of Grade X70 Steel Linepipe Produced by Non-conventional Heat Treatment; 1.1 Introduction; 1.2 Experimental; 1.3 Results and Discussion; 1.4 Conclusions; References; 2 Corrosion Inhibition of X52 Pipeline Steel in Chloride Solutions Using Nonionic Surfactant; 2.1 Introduction; 2.2 Experimental; 2.2.1 Steel Used (Electrode); 2.2.2 Test Solutions; 2.2.3 Electrochemical Evaluations; 2.3 Results and Discussion
  • 2.3.1 Electrode; 2.3.2 Electrochemical Impedance Spectroscopy (EIS); 2.3.3 Volume Fraction of Microstructural Regions; 2.3.4 Adsorption Process; 2.3.5 Surface Analysis After Electrochemical Test; 2.4 Conclusions; References; 3 Effect on the Microstructure and Mechanical Properties of the Structural Steel Welded in Marine Environment; 3.1 Introduction; 3.2 Experimental; 3.3 Results and Discussion; 3.4 Conclusions; References; Part II Characterization of Copper Alloys; 4 Mapping of Polycrystalline Flow During Hot Deformation by In Situ Tension Test of Sheet Copper Alloy; 4.1 Introduction
  • 4.2 Experimental; 4.2.1 Materials; 4.2.2 Microstructural Characterization; 4.2.3 In Situ Tension Test SEM Studies; 4.3 Results and Discussion; 4.3.1 Materials; 4.3.2 Microstructural Characterization; 4.3.3 In Situ Tension Test SEM Studies; 4.4 Conclusions; References; 5 Determination of the Activation Energy of Copper During In Situ Tension Testing by SEM; 5.1 Introduction; 5.2 Experimental; 5.2.1 Tensile Test in a Universal Machine; 5.2.2 Tensile Kammrath & Weiss Tensile Module at SEM; 5.3 Results and Discussion; 5.3.1 Tensile Test in a Universal Machine
  • 5.3.2 Tensile Kammrath & Weiss Tensile Module at SEM; 5.4 Conclusions; References; 6 Effect of Copper Additions on Secondary Carbide Precipitation in High Chromium with Cast Iron; 6.1 Introduction; 6.2 Experimental; 6.3 Results and Discussion; 6.3.1 As-Cast Structure; 6.3.2 Structure After Destabilization Heat Treatment; 6.3.3 Number and Average Diameter of Secondary Carbides; 6.3.4 Secondary Carbide Volume Fraction (SCVFrac.); 6.3.5 Retained Austenite Volume Fraction; 6.3.6 Microhardness of Matrix After Destabilization; 6.4 Conclusions; References
  • Part III Characterization of Steels Applying Heat Treatment; 7 Thermal Behavior of an HSLA Steel and the Impact in Phase Transformation: Submerged Arc Welding (SAW) Process Approach to Pipelines; 7.1 Introduction; 7.2 Experimental; 7.3 Results and Discussion; 7.3.1 Characterization of API 5L X70 Steel; 7.3.2 Dilatometry Curves; 7.3.3 Microhardness; 7.3.4 Optical Microscopy; 7.3.5 CCT Experimental Curve; 7.4 Conclusions; References; 8 Effect of Hydrogen on a Microalloyed Steel Permeate; 8.1 Introduction; 8.2 Developed Experimental; 8.2.1 Materials; 8.2.2 Heat Treatment; 8.2.3 Metallography
Control code
ocn961272184
Dimensions
unknown
Extent
1 online resource
File format
unknown
Form of item
online
Isbn
9783319316949
Level of compression
unknown
Note
SpringerLink
Quality assurance targets
not applicable
Reformatting quality
unknown
Sound
unknown sound
Specific material designation
remote
System control number
(OCoLC)961272184

Library Locations

    • InternetBorrow it
      Albany, Auckland, 0632, NZ
Processing Feedback ...