Coverart for item
The Resource Application of materials science and environmental materials (AMSEM 2015), Qingzhou Xu, Morehead State University, USA

Application of materials science and environmental materials (AMSEM 2015), Qingzhou Xu, Morehead State University, USA

Label
Application of materials science and environmental materials (AMSEM 2015)
Title
Application of materials science and environmental materials (AMSEM 2015)
Statement of responsibility
Qingzhou Xu, Morehead State University, USA
Creator
Contributor
Subject
Genre
Language
eng
Summary
"This proceedings consists of selected papers presented at the 3rd International Conference on Application of Materials Science and Environmental Materials (AMSEM2015), which was successfully held on Phuket Island, Thailand, between October 01–03, 2015. Building on the success of AMSEM2013 and AMSEM2014, AMSEM2015 continues to provide a forum for academic scientists, leading engineers, industry researchers and doctoral students to exchange and share their experience and research results, so as to promote the advancement in Materials Engineering, Environments Materials and Material Science. AMSEM2015 attracted more than 80 submissions. Among them, only 33 papers were accepted into the conference after a stringent peer review process. It is hoped that this book will provide readers with a broad overview of the latest advances on the above areas, and also serve as a good reference for academic research and industrial professionals."--Provided by publisher
Dewey number
620.1/1
Index
index present
Literary form
non fiction
http://bibfra.me/vocab/lite/meetingDate
2015
http://bibfra.me/vocab/lite/meetingName
International Conference on Application of Materials Science and Environmental Materials
Nature of contents
  • dictionaries
  • bibliography
http://library.link/vocab/relatedWorkOrContributorDate
1967-
http://library.link/vocab/relatedWorkOrContributorName
Xu, Qingzhou
http://library.link/vocab/subjectName
  • Materials science
  • Environmental protection
  • Environmental sciences
Label
Application of materials science and environmental materials (AMSEM 2015), Qingzhou Xu, Morehead State University, USA
Instantiates
Publication
Contents
  • Editorial; Chapter 1 Materials Science and Materials Engineering; The effect of sanding process on handling properties of cotton fabric; 1. Introduction; 2. Experimental; 3. Results and Discussion; 3.1. One-way ANOVA analysis; 3.2. Banding properties of cotton fabric; 3.3. Compression properties of cotton fabric; 3.4. Thermal properties of cotton fabric; 3.5. Surface properties of cotton fabric; 4. Conclusion; References; A preliminary exploration of building energy efficiency; 1. Introduction; 2. The Main Way of Building Energy Efficiency; 2.1. Exterior wall
  • 2.2. Exterior doors and windows3. Energy-saving Design Principles; 4. Building Energy Consumption in Operations Management; 4.1. Building heating energy consumption; 4.2. Energy consumption of air conditioning; 5. Conclusions; References; Optimal technical parameters for investment casting of steel elbows; 1. Introduction; 2. Experiment; 3. Results and Discussion; 3.1. The influence of the shell preheating temperature on the shrinkage porosity of the casting; 3.2. The influence of the pouring temperature on the shrinkage porosity of the casting
  • 3.3. The influence of the shell thickness on the shrinkage porosity of the casting4. Conclusions; References; Effect of austempering low alloy cast steel at temperatures below Ms point on its microstructure and properties; 1. Materials and Methods; 1.1. The preparation of sample; 1.2. Test of microstructure and property; 2. Results and discussions; 2.1. Microstructure; 2.2. Mechanical property; 2.3. Wear resistance; 3. Conclusion; References; Sliding wear behavior of AM60 alloys with alloyed lanthanum and cerium (LC) mixed rare earths; 1. Introduction; 2. Experimental Procedure
  • 3. Results and Discussion3.1. The microstructure and phase analysis of the AM60+xLC alloys; 3.2. Dry sliding wear; 4. Conclusions; References; Adsorption of acetic acid from dilute solution on zeolite 13X: Isotherm, kinetic and thermodynamic studies; 1. Introduction; 2. Experimental; 2.1. Materials; 2.2. Instruments and adsorption procedure; 3. Results and Discussion; 3.1. Adsorption kinetic; 3.1.1. Pseudo-first-order model; 3.1.2. Pseudo-second-order model; 3.2. Adsorption isotherm; 3.2.1. Langmuir isotherm model; 3.2.2. Freundlich isotherm model; 3.3. Thermodynamic determination
  • 4. ConclusionReferences; Activated carbon impregnated with zirconium hydroxide for sulfur dioxide removal; 1. Introduction; 2. Experimental Sections; 3. Results and Discussion; 4. Summary; Acknowledgements; References; Improving the mechanical properties of fluorine rubber via carbon fiber reinforcement; 1. Introduction; 2. Experiment; 2.1. Materials; 2.2. Sample preparation; 3. Results and Discussions; 3.1. The influence of the dosage of CF on mechanical properties of composites; 3.2. The influence of coupling agent on mechanical properties of composites
Control code
ocn948734431
Dimensions
unknown
Extent
1 online resource
Form of item
online
Isbn
9789813141124
Specific material designation
remote
System control number
(OCoLC)948734431
Label
Application of materials science and environmental materials (AMSEM 2015), Qingzhou Xu, Morehead State University, USA
Publication
Contents
  • Editorial; Chapter 1 Materials Science and Materials Engineering; The effect of sanding process on handling properties of cotton fabric; 1. Introduction; 2. Experimental; 3. Results and Discussion; 3.1. One-way ANOVA analysis; 3.2. Banding properties of cotton fabric; 3.3. Compression properties of cotton fabric; 3.4. Thermal properties of cotton fabric; 3.5. Surface properties of cotton fabric; 4. Conclusion; References; A preliminary exploration of building energy efficiency; 1. Introduction; 2. The Main Way of Building Energy Efficiency; 2.1. Exterior wall
  • 2.2. Exterior doors and windows3. Energy-saving Design Principles; 4. Building Energy Consumption in Operations Management; 4.1. Building heating energy consumption; 4.2. Energy consumption of air conditioning; 5. Conclusions; References; Optimal technical parameters for investment casting of steel elbows; 1. Introduction; 2. Experiment; 3. Results and Discussion; 3.1. The influence of the shell preheating temperature on the shrinkage porosity of the casting; 3.2. The influence of the pouring temperature on the shrinkage porosity of the casting
  • 3.3. The influence of the shell thickness on the shrinkage porosity of the casting4. Conclusions; References; Effect of austempering low alloy cast steel at temperatures below Ms point on its microstructure and properties; 1. Materials and Methods; 1.1. The preparation of sample; 1.2. Test of microstructure and property; 2. Results and discussions; 2.1. Microstructure; 2.2. Mechanical property; 2.3. Wear resistance; 3. Conclusion; References; Sliding wear behavior of AM60 alloys with alloyed lanthanum and cerium (LC) mixed rare earths; 1. Introduction; 2. Experimental Procedure
  • 3. Results and Discussion3.1. The microstructure and phase analysis of the AM60+xLC alloys; 3.2. Dry sliding wear; 4. Conclusions; References; Adsorption of acetic acid from dilute solution on zeolite 13X: Isotherm, kinetic and thermodynamic studies; 1. Introduction; 2. Experimental; 2.1. Materials; 2.2. Instruments and adsorption procedure; 3. Results and Discussion; 3.1. Adsorption kinetic; 3.1.1. Pseudo-first-order model; 3.1.2. Pseudo-second-order model; 3.2. Adsorption isotherm; 3.2.1. Langmuir isotherm model; 3.2.2. Freundlich isotherm model; 3.3. Thermodynamic determination
  • 4. ConclusionReferences; Activated carbon impregnated with zirconium hydroxide for sulfur dioxide removal; 1. Introduction; 2. Experimental Sections; 3. Results and Discussion; 4. Summary; Acknowledgements; References; Improving the mechanical properties of fluorine rubber via carbon fiber reinforcement; 1. Introduction; 2. Experiment; 2.1. Materials; 2.2. Sample preparation; 3. Results and Discussions; 3.1. The influence of the dosage of CF on mechanical properties of composites; 3.2. The influence of coupling agent on mechanical properties of composites
Control code
ocn948734431
Dimensions
unknown
Extent
1 online resource
Form of item
online
Isbn
9789813141124
Specific material designation
remote
System control number
(OCoLC)948734431

Library Locations

    • InternetBorrow it
      Albany, Auckland, 0632, NZ
Processing Feedback ...